How To Set Up A Vivitar Drone

Vivitar 360 Sky View Video Drone
User Manual

DRC-888/X-98
GPS
FOLLOW ME Engineering

PRE-Flying CHECKLIST

Earlier attempting to fly your drone, make sure that y'all have clone all of the following.

Inserted four AA Batteries in Your Remote
Encounter page 7 of this manual for more than data.
Charged Your Drone Battery
See page of this manual for more information.
Bank check That the Propellers are Firmly Fastened
Run into folio 21 of this manual for more than information.
Calibrated Your Drone with the Remote Control
Meet page 9 of this manual for more information.
Calibrated Your Drone's Gyroscope
See page 9 of this transmission for more information.
Consummate the compass calibration process,
encounter the page ix-10 this transmission for more information.
Unlock your drone.

Warning:

Faure to to your drone before flight can pb to severe flying malfunctions and potential damage your Drone. Always fly carefully!

For more information and la instructional videos…I your drone, browse rho QR lawmaking.

1. Introduction

Thanks for purchasing the Vivitar 360 SKYVIEW Video Drone, item DRC6368. The included remote controlled aircraft is designed specifically for outdoor flying In guild to become the best possible results please read this user's manual carefully before using. In addition, be sure to proceed this manual in a safety place for time to come reference.

2. Features

two.4Ghz Remote Control Arrangement and Wi-Fi Control
GPS Navigation
Follow ME Engineering science
Full HD360 Camera with Live Video Feed, Real Time Manual
Real Time Viewing
2X-GPS
1000ft Range

iii. Of import Safety Precautions

When using your Vivitar 360 SkEVEview Video Drone, basic safety precautions should always be followed, including the post-obit:

Practise not allow children or the infirm to operate your drone without developed supervision. For safety purposes, merely allow experienced pilots aged fourteen and upwards fly your drone.
To avoid choking hazards, keep all small parts and pieces away from children.
Your drone is not a toy. Makes sure that it is properly assembled before use, and operated safely.
Keep your drone away from obstacles, crowds, power lines, trees, and bodies of water while it is in flight. Always wing your drone in a broad open spacious surround. Avert flight your drone directly higher up people or animals. Maintain a 7ft (2m) distance from the aircraft when taking off and landing,
Only utilize your drone in a dry environment. Your drone is composed of sophisticated electronic components and Ferts. To avert impairment to your drone, please keep your drone abroad from water and moisture. Apply a soft dry cloth to wipe the surface of your drone and go on information technology clean.
Beginner and novice level pilots should practice flight with experienced pilots until suitably experienced in flight.
To ensure safe. merely utilize the included parts when using your drones. a Make sure to keep your ears and optics protected when using your drone. When your drone's blades are spinning, make sure to go along people and objects at a altitude from rotating parts.
Proceed your drone abroad from excessive rut or flames, especially while charging the battery.
Please recycle or dispose of your drone properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your speaker for further information.

four. Package Contents

5. Specification

Weight: 710g
Battery : 7.4V Lithium Polymer Battery
Height: 168mm Diameter: -350mm
Charging Time: -five hours
Flying Time Per Accuse: -10 minutes

6. A quick wait at your Drone

seven. A quick look at your remote command

8. Inserting Batteries into your remote

Employ a screwdriver to open up the battery compartment located on the rear of your remote control.
Insert 4 AA15V batteries, making sure that the batteries are inserted with the correct polarity (u,-) every bit displayed in the battery compartment.

Once the batteries are inserted, put the battery compartment cover back on the battery compart-ment, and use a screwdriver to close information technology deeply.

Alert:

Do not mix rechargeable and non-rechargeable batteries.
Exercise not mix quondam and new batteries or unlike types of batteries.
Remove exhausted batteries and dispose of them based on the rules of your local municipality.
Remove the batteries from your remote control if it will not exist in apply for an extended period of time.

ix. Charging your Drone's Bombardment.

Use included charging adapter to charging Drone'south Battery.

Charging takes nigh 5 hours to complete.

Warning:

It is recommended to use a 5V,1-2A charger (not included) to charge your bombardment.
Do not leave the charger unattended in the presence of children.
Do not expose the battery to excessive oestrus or flames.
While charging your battery, keep it away from flammable materials.
When the quadcopter'southward battery is on low power and cannot fly, the power switch of quadcopter must exist turned off.

Once your battery is fully charged information technology can exist inserted directly into the battery slot on the underside of your drone.

10. Calibrating Your Drone (Preparing for Flying)

TO power on your drone, slide the ON/OFF switch on the bottom of your drone to the ON position. To power on your remote control, press the ON/OFF push button. Once your drone and remote command are powered on, follow the scale steps beneath in order to prepare your drone for flight.

Calibrating Your Drone with Your Remote Control

Pull the throttle stick all the manner down and then button information technology all the way up.
When the LED lights on the rear legs of your drone are solid blue and the LED lights on the front legs of your drone are solid red then your drone is synchronized with your remote control and ready to fly.
When the LED lights on the rear legs of your drone are solid green and the LED lights on the front legs of your drone are solid ruddy and then your drone is in GPS mode.

Calibrating Your Drone's Internal Gyroscope

Calibrate your drone's Internal gyroscope to ensure smooth and balanced flight. Before you start. brand sure your drone is placed on a apartment, stable surface.

Pull the throttle stick and the directional stick all the way down and to the left simultaneously. Release them subsequently well-nigh two-3 seconds.
The LED lights on the rear legs of your drone will turn blue and dark-green and start blinking rapidly. The LED lights on the front end legs of your drone will plough red and kickoff blinking rapidly while synchronizing.
The LED lights on the rear legs of your drone volition turn solid blue, and the LED lights on the front legs of your drone will turn solid cerise to signal that your drone's internal gyroscope is calibrated.

Aircraft Compass Calibration

The aircraft compass scale allows your drone to exist tracked over CPS. Before you showtime, make sure your drone is placed on a apartment, stable surface.

Press the geomagnetic calibration button on the remote command.

Rotate your drone horizontally, spinning it in a clockwise direction for 3 revolutions. The lights on the front end legs of your drone will solidly shine red, while the lights on the back legs of your drone will solidly smooth dark-green.

-Plow the head down and rotate your drone vertically, spinning it for 3 revolutions When y'all see light-green lights shining solidly, scale is complete.

Warning:

When flying your drone in CPS mode, make sure you are in a wide open up space.
Exercise not calibrate your drone in areas where there are potent magnetic fields.
When calibrating, do not carry ferromagnetic materials such as keys or cell phones.
Do non calibrate near large sheets of metal.

xi. Locking and Unlocking Your Drone

Unlocking Your Drone

If your drone is locked, push the throttle stick all the way up and the pull it dorsum to its mid-point and your drone volition exist unlocked.

Locking Your Drone

With your drone in a landed position, pull the throttle stick all the way down and agree it down for approximately three seconds. The motor will cease and your drone will be locked in place.

12. Flying Your Drone

Pre-Flight Preparation

If you accept never used a drone before and y'all are not an experienced pilot, make sure to read these instructions carefully before flying. Get familiar with all of the controls. If necessary, read through these instructions many times and practice handling the remote command until you feel completely comfy and fix.

Place your drone G a articulate, open field, Make sure that it is resting on a secure. flat surface.
Practice using the throttle stick and the directional control stick (come across below).
By simulating the use of the remote and both sticks, you will grow more than comfortable with the natural motions required during flight and you volition learn to react more chop-chop to unexpected circumstances.

13. One Key Takeoff & Landing

In one case your drone is unlocked, y'all tin can printing the one key takeoff button and the drone volition automatically hover one.5 meters above the ground.

By pressing the ane key landing push button, your drone will automatically country on the basis.
Ane Key Landing

fourteen. Headless Style

Headless way allows users to wing their drone without worrying near the drone's orientation. Regardless of which way the drone is facing, this function ensures that the drone volition always follow controls from your perspective all the time.

To enter headless mode, before your drone takes oftentimes stand in front of your drone and press the headless mode button on your remote command.

15. Return Functions

When your drone is properly calibrated to be tracked over CPS, then you lot can apply multiple return functions which allow your drone to return to a specific destination.

NOTES

In order to brand certain that your drone can be tracked over CPS, complete the "aircraft compass calibration' procedure discussed earlier in this transmission.
You can use the Vivitar SkyEYEview app to view your Drone'due south GPS Status.
Make sure to fly your drone in clear areas with potent GPS signal in society to apply the return to home functions successfully.

Smart Return Office

One The Smart Return Function returns your drone to the location of Key your remote control or phone. Push the ane key return button on Render your remote command, or the corresponding push button in the Visitor SkyEVEview app to enter Smart Return way. When in Smart Return style, you can utilise the directional command stick to command the drone's landing point. Button the throttle stick to exit Smart Return mode.

Notation: If CPS signal and remote control signal is lost for more than than half dozen seconds while In Return to Home style, the drone volition descend slowly until information technology lands on the ground.

Failsafe Return Part

If CPS indicate and remote command betoken is lost for more than 6 seconds while flying, the Failsafe Render Function automatically returns your drone to the origin of its flight. This feature is only available when you begin your flying with a strong GPS signal.

NOTE: When in Failsafe Render mode, your drone is unable to automatically avert obstacles.

xvi. Follow Me Flight Style

When your remote control and your drone receive GPS betoken. press the follow me flight button on the remote control and your drone will automatically fly towards the remote control and follow it as is moves around.

When in follow me flying mode, the drone will stay between 4-20 meters of your remote command. Push the directional command stick forward to more the drone farther from the remote command. Pull information technology back to bring the drone closer to the remote control. If the drone gets closer than 4 meters to the remote command or farther than 20 meters away, and then printing the follow me flight button over again to bring your drone back in range.

Follow me flight mode tin can be used with both your remote control or your phone. If you are using both together. your drone volition stay within range of your remote command

17. GPS Environs Flying Fashion

When your remote control and your drone receive CPS signal, printing the GPS Surround Flight button on the remote control, and your drone will automatically fly in circles around the remote.

When in GPS Surround Flying. push the directional control stick to the left and the drone will fly in counterclockwise circles. Push the directional control stick to the right and the drone volition fly in clockwise circles. Button the directional command stick forrad to enlarge the radius of the circle or pull information technology backwards to shrink the diameter of the circumvolve.

18. Emergency Finish Function.

If your drone is flying abnormally press rho one fundamental return push button and the CPS surround flight cottons on your remote command simultaneously to trigger an emergency stop.

19. Using the Vivitar SkyEYEview App

i. Connect Mobile Phone Holder to the Remote Control

2. Download the Vivitar SlcyEYEview App

Go to the Ape Store or Google Play store and search for the Vivitar SkyEYEview app. Follow the instructions to go on to download the app. You lot can al.o neon the applicable OP lawmaking below

3. Using WIFI to Connect the Drone to Your Phone

Power on your drone. LED lights will illuminate to indicate that it is powered on.
On your mobile phone, observe the WIFI Settings card. Select the network labeled SKEYE WiFi-xxxxxx in guild to sync your drone with your phone.
Open the Vivitar SkyEYEview application on your phone. Press the "TAKE OFF" option on the menu screen in order to open up the control interface.

4. Control interface Function

v. Manu Screen Option

Tab " TAKE OFF" to access the control interface.

Tab " Photos and Videos" to view photos and videos recorded with your drone's photographic camera.

For more information on using your drone Tab " Instructions"

Troubleshooting

Trouble: During calibration, the red lights on the front legs every bit well as light-green and blue lights on the rear legs flash slowly.
Solution: The drone and remote control are non recognizing each other. Turn both units off, urn them back on and then try calibrating your drone and remote control again.

Problem: The drone is not connecting to CPS.
Solution: There may not be a stiff enough COS betoken available. Endeavour moving outside to a clear spacious area. Then reattampt the compass calibration process.

Problem: The drone won't unlock.
Solution: The drone's bombardment may exist drained. Try replacing or recharging the battery. Also, the remote control and the drone may non exist synchronized. Endeavor turning both off so effort recali-brating them.

Remote Command Calorie-free Indicators

The light-green light is flashing slowly
The remote command is notwithstanding calibrating.

The light-green calorie-free is flashing slowly while the remote is making repeated beeping sounds.
The batteries are running low on power and need to be replaced.

There is a red calorie-free flashing slowly while the remote is making repeated beeping sounds.
The remote control is not yet sensing a GPS connection

There is a ruddy light shining steadily.
The remote control is connected to GPS

Replacing your Propeller Bombardment

Remove the cap covering the Propeller.

Unscrew the propeller then that your electric current propeller tin be remove and replaced with a new one.

Spiral the new propeller on and then cap dorsum on the propeller.

FCC Compliance Statement

Changes or modifications not expressly approved past the party responsible for compliance could void the user'southward authority to operate the equipment.

This device complies with Part xv of the FCC Rules. Operation is discipline to the following ii conditions:

This device may not cause harmful interference, and
This device must have any interference received, including interference that may cause undesired performance.

This equipment has been tested and found to comply with the limits for a Grade B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if non installed and used in accord with the instructions, may cause harmful interference to radio communications. Nevertheless, there is no guarantee that interference will non occur in a item installation.

If this equipment does cause harmful interference to radio or tv set reception, which tin can be determined past turning the equipment off and on, the user is encouraged to try to right the interference by ane or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a excursion different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for aid.

Vivitar 1 Year Warranty

This warranty covers the original consumer purchaser only and is non transferable.

This warranty covers products that fail to role properly Nether NORMAL USAGE, due to defects in material or workmanship. Your product will exist repaired or replaced at no accuse for parts or labor for a period of one year.

What Is Not Covered by Warranty

Amercement or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal employ, including only limited to, repair by unauthorized parties, tampering, modification or blow.

To Obtain Warranty Service and Troubleshooting Information:

Telephone call 1-800-592-9541 in the U.S. or visit our website at www.vivitarcom.

To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact u.s.a. for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable Warranty catamenia, MUST be presented in society to obtain the requested service. Information technology is your responsibility to properly package and send any defective products along with a dated copy of proof of buy, a written explanation of the problem, and a valid return accost to the authorized service eye at your expense. Exercise not include whatever other items or accessories with the defective product. Any products received past the authorized service center that are not covered by warranty will exist returned unrepaired.

Downloads

Ezoic

Vivitar 360 Sky View Video Drone User Manual – Download [optimized]
Vivitar 360 Sky View Video Drone User Manual – Download