How To Set Volume On Cox Remote

If your Cox contour remote volume not working, and then in that location is most probable an issue with your remote. On the other hand, it could exist your TV that does non receive the bespeak, and then let'southward discover out!

To prepare a Cox remote, first ensure that the batteries are functional and the hardware of the remote is clean. Adjacent, you tin can try to reprogram the remote to your Goggle box, then ability cycle both devices, and lastly inspect the infrared signal of your remote.

If that wasn't enough, accept a expect at the possible causes a little amend so information technology can be easier to apply the solutions subsequently.

Why Is My Cox Profile Remote Not Working?

Nosotros should mention that your remote can easily malfunction after being an object of h2o or drib damage.

If that's the case, it is possible that the hardware is damaged explaining why the volume is not working.

We can exclude the hardware possibility for at present and accept a await at what else might have gone wrong:

1. Worn-out Batteries

The batteries could have gone faulty, preventing your remote from functionating until further notice.

2. Blocked Signal

Annihilation standing in the way betwixt your TV and remote could cake the signal, making your remote non work.

3. Remote Erased

If your Cox remote has been erased from the Tv, information technology won't be functional until paired again.

4. Hardware Damage

If the remote has been hardware damaged, information technology won't work until a repair.

5. Problem with Tv set

At last, a possible problem with your TV could prevent your device from recognizing the remote.

Those were the most frequent causes and at present we're about to depict how to tackle each of them so let'south jump right in!

How To Fix Cox Contour Remote Volume Not Working?

Earlier we proceed, ensure your TV is turned ON and is prepare to recognize the remote.

If you've accidentally unpaired your TV with the remote, you won't be able to perform any functioning or whatsoever using the Cox remote.

Having that in heed permit's start excluding the possibilities one by i.

Solution #i Perform A Power Reset

The power reset or likewise known as a power cycle is frequently performed past users having the same as you practice.

The method is designed to bleed the electricity of your device and ensure a clean boot later it.

Here is how to perform a ability cycle on your Cox Profile remote:

Grab your remote and printing the INPUT and VOL+ buttons.
Hold the buttons for an average of 10 seconds.
Release the pressure.
Accept the batteries out and expect for sixty seconds.
Put the batteries back.
Test.

If you've performed the ability bicycle and the book is still not working, permit's try with a new battery.

Solution #2 Replace Batteries

Replacing the batteries should be one of the first steps against the issue and if you still haven't replaced them, now it'southward the time to do so.

To replace the batteries of the remote, yous can follow the instructions down below:

Get yourself a fresh prepare of batteries.
Unscrew the battery compartment underneath the remote.
Carefully eject the old batteries.
Insert the new batteries.
Put the compartment's cover and screw it tightly.

Easy as that, yous supplant the remote of your remote easily. If that didn't help, still, you can proceed with our adjacent solution.

Solution #iii Hard Reset Your Television

Many users suggested hard resetting your Television whenever the remote refuses to work. In that regard we've prepared a elementary step to draw how:

Turn off your Television from the hardware power button, by pressing it once.
Equally presently as your Telly turns off, unplug the power adapter.
Wait for 3 minutes with the power adapter of your TV unplugged.
Connect the power adapter to the power source and turn on your Tv set.
Check your remote for functionality.

If the Cox contour remote volume is non working even afterwards performing a difficult reset on your Boob tube, and then in that location could be something blocking the signal. Let's observe out!

Solution #iv Remove Interference

Another solution is to remove any interference that interrupts your remote signal. Anything from big metal objects below your TV's receiver could be causing interference issues.

Remove any solid objects, located betwixt your Boob tube and remote and test if your Cox remote' audio will work.

Other than that, you can ensure to remove whatsoever electronics nearby your TV and remote and perform some other test then.

Annotation: It is good to try aiming at your Boob tube from unlike angles while applying a little bit more forcefulness than usual on the book buttons.

Solution #5 Re-Pair Your Remote

If zippo has worked so far, then perhaps your remote is more likely to exist disconnected from the TV.

Even if only the volume buttons are not working, it is recommended to try to unpair and pair from scratch.

Here is how to repair your Cox remote to whatever Telly:

First, aim your Cox remote at the Television receiver.
Printing and agree the setup button for 3 seconds.
Wait for the cherry LED on the remote to turn light-green.
Enter ix-eight-1 for a specific activation code.

Result: The LED light on the front of your remote will blink in green twice to bespeak successful pairing.

Afterwards performing these steps, printing the power button and if your Idiot box turns off, and so your remote has been successfully paired & fixed!

Solution #6 Clean the Hardware

The last thing you can try before buying a new remote is to clean its hardware. Sometimes gathered grit may impact the remote'south functionality, resulting in inactive buttons.

But unscrew the bottom compartment until you access the remote'south PCB and plastic button encompass. Clean it advisedly and focus on removing dust from the volume buttons.

Note: As the plastic comprehend is removable, y'all may wash it upwardly and dry it before inserting it back into the remote.

For the PCB, utilize a wet napkin or dust cleaner to carefully remove whatsoever dust particles that may be interrupting your remote signal.

Once set up you tin can put everything back together and examination it. If the volume buttons are still not working, they could be broken and y'all'll need a repair.

To prepare the sound of a Cox remote, endeavour replacing the batteries, perform a power reset and clean its hardware. If that didn't work, hard reset your Television receiver, and then reprogram the Cox remote, and remove any possible interference.

Read Next: How to Setup Cox Panoramic WiFi?

Bottom Line:

Now that you know why is Cox Profile remote volume not working, yous can hands troubleshoot the upshot at dwelling house.

If the issue notwithstanding persists, a new remote is always a considerable idea due to the approachable toll of the universal units!

Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.